Bed Head Wave Artist Won’t Turn On: Troubleshooting Guide

If your Bed Head Wave Artist won’t turn on, the problem may be as simple as a power connection, outlet, or switch issue. The Wave Artist Tourmaline Ceramic Deep Waver is designed with multiple heat settings and can reach temperatures of up to 400°F.

Before assuming the waver has failed, work through the following troubleshooting steps.

Why won’t my Bed Head Wave Artist turn on?

The most common possibilities are:

The power plug is not fully inserted.
The electrical outlet is not working.
The Wave Artist’s switch has not been moved to the ON position.
A circuit breaker or GFCI outlet has tripped.
The appliance has developed an internal electrical fault.
The power cord or plug may be damaged.

If the waver was working normally and suddenly stopped, unplug it and allow it to cool completely before testing it again.

How do I turn on the Bed Head Wave Artist?

First, make sure the waver is sitting on a stable, heat-resistant surface. Plug it directly into a functioning electrical outlet and move the power switch to the ON position. Then select the desired heat setting.

The official Bed Head product information confirms that the Wave Artist has multiple heat settings and instant heat recovery.

Give the tool some time to heat before attempting to use it.

What should I do if my Bed Head Wave Artist has no power?

Try these checks in order:

Unplug the Wave Artist.
Check the plug and cord for visible damage.
Plug another small appliance into the same outlet to verify that the outlet works.
If you’re using a bathroom outlet, check whether the GFCI has tripped.
Try a different known-working outlet.
Plug the Wave Artist directly into the wall rather than through an extension cord or power strip.
Turn the waver on again.

If other appliances work from the outlet but the Wave Artist remains completely unresponsive, the appliance itself may need service or replacement.

Why is my Bed Head Wave Artist not heating up?

If the Wave Artist appears to turn on but the barrels remain cold, first confirm that you’ve selected a heat setting and give the appliance time to warm up.

Don’t attempt to disassemble the waver or repair its internal wiring. A hair-styling appliance combines electricity with very high temperatures, so internal repairs should be left to an appropriately qualified service professional.

Why does my Bed Head Wave Artist turn off by itself?

If your Wave Artist shuts off unexpectedly, unplug it and let it cool down. Check the outlet and power connection before trying again.

Some Bed Head waver models have safety-related features, but features vary by model. For the Wave Artist specifically, the manufacturer’s current product page lists a 3-year limited warranty, while its FAQ says warranty information is also provided in the product instruction manual.

Could the outlet be the reason my Wave Artist won’t turn on?

Yes. A dead outlet is an easy thing to overlook.

Test the outlet with another appliance. If it doesn’t work, check your home’s circuit breaker or, where applicable, reset the GFCI outlet.

If the outlet works normally with another appliance and your Wave Artist still has no response, continue troubleshooting the waver itself.

What if my Bed Head Wave Artist worked yesterday but won’t turn on today?

Start with the basics rather than immediately assuming the appliance is permanently broken:

Check the outlet.
Check the plug.
Inspect the cord for damage.
Make sure the switch is actually in the ON position.
Try another wall outlet.
Allow the appliance to cool completely before testing it again.

If it still doesn’t respond, stop using it.

What if the Bed Head Wave Artist cord is damaged?

Do not use the waver if the cord, plug, or housing is visibly damaged. Don’t tape over a damaged cord or attempt an improvised repair.

Because the Wave Artist operates at high heat, continuing to use an appliance with damaged electrical components can create a safety hazard.

Is my Bed Head Wave Artist still under warranty?

The current Bed Head product page lists a 3-year limited warranty for the Wave Artist.

Bed Head also states that customers can contact Consumer Services to determine whether a product is still covered and receive instructions for replacement or warranty service. The manufacturer’s FAQ lists 1-800-487-7273 for Consumer Services.

Have the model number available when contacting them. Bed Head says its appliance model numbers begin with “BH” and are imprinted on the appliance.

Bed Head official FAQ and Consumer Services information

Should I replace my Bed Head Wave Artist if it won’t turn on?

Not necessarily. If the problem is an outlet, GFCI, or power connection, the waver itself may be fine.

However, if you’ve confirmed that:

the outlet works,
the plug is properly connected,
there is no visible cord damage,
the waver remains completely unresponsive,

then contacting Bed Head about warranty or replacement options is the safer choice than attempting to repair the appliance yourself.

Final troubleshooting checklist

Bed Head Wave Artist won’t turn on? Try this:

☐ Test the electrical outlet
☐ Check the circuit breaker/GFCI
☐ Plug the waver directly into the wall
☐ Confirm the power switch is ON
☐ Check the cord and plug for visible damage
☐ Let the appliance cool completely and try again
☐ Stop using it if there is damage, burning odor, smoke, or unusual electrical behavior
☐ Check the model number and warranty status
☐ Contact Bed Head Consumer Services if it remains dead

The official Bed Head site also provides a Wave Artist how-to video and other styling resources if your appliance powers on but you need help operating it.